From The Anvil Robe Pull Handle 500mm - Large - Beeswax

The Robe pull handle, large 500mm, is a substantial twisted bar pull from the Blacksmith collection, mounted on decorative fixing plates. Its length suits entrance doors, barn and plank doors and tall internal doors, adding a hand-worked look to cottage, rustic and traditional properties.

The handle is 500mm long overall with a 25mm diameter bar, a 240mm internal grip and a 65mm projection. It fixes at 273mm centres through 140mm x 51mm plates using the matching stainless steel wood screws supplied. A smaller size is also available for cupboards.

Features

• Twisted bar on decorative fixing plates
• 500mm overall length
• 25mm diameter bar
• 273mm fixing centres
• Part of the Blacksmith collection
• Supplied with matching stainless steel wood screws

Specification

About the Beeswax finish

Beeswax is the most traditional finish with a soft, natural aesthetic featuring subtle blue and deep red ochre tones which are preserved in the steel during the manufacturing process; this finish is ideally suited to older, traditional dwellings and cottage interiors. Beeswax products are hand forged from mild steel. After forging, the subtle colours in the metal are preserved by dipping the products in hot beeswax, resulting in the soft, matte richness.

Care and maintenance

Due to temperature changes or packaging, a Beeswax product may occasionally show signs of a white bloom upon opening. This can be buffed with a soft cloth to remove. Although this finish already offers a very strong barrier against environmental conditions, we recommend re-applying a small amount of the 'Maintenance Wax' (33002) periodically with a cloth or brush which provides additional protection to the surface of your product and further protects this from any harmful external elements. To increase the mechanical life expectancy of your products, we recommend regular oiling of all moving parts using the ‘3-in-1 Oil’ (92337). This process is also highly recommended during initial installation. *Please note that where possible we recommend using the External Beeswax products (in place of standard Beeswax) in areas of your property where damp conditions are expected such as kitchens and bathrooms. Light surface rust may appear if using the standard Beeswax finish in damp conditions, but can be removed with ease using 00 grade wire wool, followed by an application of 'Maintenance Wax' (33002).