From The Anvil Octagonal Centre Door Knob - External - 82mm - External Beeswax

The Octagonal centre door knob is an 82mm external knob for fitting to the centre of a front door. It suits many kinds of property, from country cottages to town houses and period homes, and can be combined with the Octagonal cupboard knobs for a matching look inside.

A location pin on the rose stops unwanted movement over the life of the knob. It can be fitted on its own or back to back with the internal Octagonal centre door knob, using the M10 x 90mm dome headed bolt supplied for bolt-through fixing.

Features

• 82mm external centre door knob
• Location pin on the rose prevents turning
• Fit alone or back to back with internal knob
• Bolt-through fixing
• Matches the Octagonal cupboard knobs
• Supplied with M10 x 90mm dome headed bolt

Specification

About the External Beeswax finish

The External Beeswax finish aesthetically is the same as Beeswax; A traditional finish with a soft, natural look featuring subtle blue and deep red ochre tones which are preserved in the steel during the manufacturing process. This finish is ideally suited to older, traditional dwellings and cottage interiors. The External Beeswax products are hand forged from mild steel. After forging, the subtle colours in the metal are preserved by dipping the products in hot, anti-corrosive beeswax unique to From The Anvil. This results in a soft, matte richness and offers excellent protection when the products are fitted both internally and externally.

Care and maintenance

Due to temperature changes or packaging, a Beeswax product may occasionally show signs of a white bloom upon opening. This can be buffed with a soft cloth to remove. Although this finish already offers a very strong barrier against environmental conditions, we recommend re-applying a small amount of the 'Maintenance Wax' (33002) periodically with a cloth or brush which provides additional protection to the surface of your product and further protects this from any harmful external elements. To increase the mechanical life expectancy of your products, we recommend regular oiling of all moving parts using the ‘3-in-1 Oil’ (92337). This process is also highly recommended during initial installation. *Please note that where possible we recommend using the External Beeswax products (in place of standard Beeswax) in areas of your property where damp conditions are expected such as kitchens and bathrooms. Light surface rust may appear if using the standard Beeswax finish in damp conditions but can be removed with ease using 00 grade wire wool, followed by an application of 'Maintenance Wax' (33002).