From The Anvil Rim Cylinder Pull - External Beeswax

The rim cylinder pull is a small door pull designed for use with a rim cylinder and night latch, typically on front and back doors. It gives a convenient grip for pushing or pulling the door open and closed, and can be combined with matching door furniture to create a coordinated entrance.

The pull is held in place by the rim cylinder itself, which compresses with the night latch to tighten and fix it, so no separate screws are needed. A location pin on the rear stops it rotating. It measures 81mm x 50mm overall on a 53mm x 50mm backplate and projects 26mm.

Features

• For rim cylinders and night latches
• Fixed by the rim cylinder itself
• Location pin prevents rotation
• 81mm x 50mm overall
• 26mm projection
• Typically used on exterior doors

Specification

About the External Beeswax finish

The External Beeswax finish aesthetically is the same as Beeswax; A traditional finish with a soft, natural look featuring subtle blue and deep red ochre tones which are preserved in the steel during the manufacturing process. This finish is ideally suited to older, traditional dwellings and cottage interiors. The External Beeswax products are hand forged from mild steel. After forging, the subtle colours in the metal are preserved by dipping the products in hot, anti-corrosive beeswax unique to From The Anvil. This results in a soft, matte richness and offers excellent protection when the products are fitted both internally and externally.

Care and maintenance

Due to temperature changes or packaging, a Beeswax product may occasionally show signs of a white bloom upon opening. This can be buffed with a soft cloth to remove. Although this finish already offers a very strong barrier against environmental conditions, we recommend re-applying a small amount of the 'Maintenance Wax' (33002) periodically with a cloth or brush which provides additional protection to the surface of your product and further protects this from any harmful external elements. To increase the mechanical life expectancy of your products, we recommend regular oiling of all moving parts using the ‘3-in-1 Oil’ (92337). This process is also highly recommended during initial installation. *Please note that where possible we recommend using the External Beeswax products (in place of standard Beeswax) in areas of your property where damp conditions are expected such as kitchens and bathrooms. Light surface rust may appear if using the standard Beeswax finish in damp conditions but can be removed with ease using 00 grade wire wool, followed by an application of 'Maintenance Wax' (33002).