From The Anvil Door Letter G - 78mm - Polished Bronze

Door letter G is a weighty, decorative 78mm letter that adds a finishing touch to an entrance door. Use it to mark a flat or unit, or combine it with other letters from the same set to spell out a house name.

The letter is 8mm thick and fixes directly to the door face with the matching wood screws supplied. Letters are sold singly, so order one for each character you need.

Features

• Weighty, decorative design
• 78mm high, 8mm thick
• Matches the other door letters
• Sold singly
• Supplied with matching wood screws

Specification

About the Polished Bronze finish

Polished Bronze is a bright, highly reflective finish with an abundance of character and warmth. This finish really pops when used in contemporary settings with bold colourways, adding visual interest and contrast. The Polished Bronze is manufactured from solid bronze containing a minimum of 85% copper. The finish is first aged, then repolished to create subtle contrast between the lighter surface areas and darker patina which gathers around the edges and recesses. To preserve the bright, reflective finish a durable lacquer is applied during the final stages of manufacturing. Bronze will naturally darken over time, however the bright reflective finish can be restored by polishing with a beeswax based furniture polish if desired.

Care and maintenance

We advise against the use of chemicals, and other harsh cleaning products on this finish as it may affect the lacquer. We recommend using a dry cloth, or a beeswax based furniture polish to restore shine as the Bronze will naturally tarnish and darken over. This will help remove dirt, fingerprints and watermarks, while offering some protection. An oily cloth can be used to wipe over the finish from time to time to remove any harmful deposits that build up on the surface of your product, this will also aid protection against any environmental elements. To increase the mechanical life expectancy of your products, we recommend regular oiling of all moving parts using the ‘3-in-1 Oil’ (92337). This process is also highly recommended during initial installation.