From The Anvil Gothic Screw on Staple for Thumb Latch - Standard - External Beeswax

The Gothic screw on staple for thumb latch, standard version, is the frame-mounted part of a thumblatch that receives the latch bar when the door is closed. It can be used to replace a missing part from an existing thumblatch set, and is an alternative to drive-in spike or staple pins.

Screw on staples are typically used when fitting a thumblatch to a thinner door. This staple measures 100mm x 18mm overall, is sold singly and is fixed with the matching stainless steel wood screws supplied.

Features

• Screw on staple for thumblatches
• Alternative to drive-in staple pins
• Suits thinner doors
• Replacement for a missing thumblatch part
• 100mm x 18mm
• Supplied with matching stainless steel wood screws

Specification

About the External Beeswax finish

The External Beeswax finish aesthetically is the same as Beeswax; A traditional finish with a soft, natural look featuring subtle blue and deep red ochre tones which are preserved in the steel during the manufacturing process. This finish is ideally suited to older, traditional dwellings and cottage interiors. The External Beeswax products are hand forged from mild steel. After forging, the subtle colours in the metal are preserved by dipping the products in hot, anti-corrosive beeswax unique to From The Anvil. This results in a soft, matte richness and offers excellent protection when the products are fitted both internally and externally.

Care and maintenance

Due to temperature changes or packaging, a Beeswax product may occasionally show signs of a white bloom upon opening. This can be buffed with a soft cloth to remove. Although this finish already offers a very strong barrier against environmental conditions, we recommend re-applying a small amount of the 'Maintenance Wax' (33002) periodically with a cloth or brush which provides additional protection to the surface of your product and further protects this from any harmful external elements. To increase the mechanical life expectancy of your products, we recommend regular oiling of all moving parts using the ‘3-in-1 Oil’ (92337). This process is also highly recommended during initial installation. *Please note that where possible we recommend using the External Beeswax products (in place of standard Beeswax) in areas of your property where damp conditions are expected such as kitchens and bathrooms. Light surface rust may appear if using the standard Beeswax finish in damp conditions but can be removed with ease using 00 grade wire wool, followed by an application of 'Maintenance Wax' (33002).